DELL H200 Manual Do Utilizador

56

PERC H200 and 6Gbps SAS HBA BIOS

Viewing Virtual Disk Properties

Follow these steps to view the properties of RAID 0, RAID 1 or RAID 10 
virtual disks:

1 Select a controller from the Adapter List in the Configuration Utility.
2 Select the RAID Properties option.

•

If there are no existing virtual disks, you will be prompted to create a 
RAID 0, RAID 1 or RAID 10 virtual disk.

•

If there is one existing virtual disk, select View Existing volume.

•

If there are two existing virtual disks, press <Alt><N> to view the 
next virtual disk.

•

If a compatible global hot spare exists it displays with the members of 
the virtual disk.

3 Press <Enter> when the Manage volume item is selected to manage the 

current virtual disk.

Activating a Virtual Disk

A virtual disk can become inactive if, for example, it is removed from 
one PERC H200 card and moved to another one. The Activate option allows 
you to reactivate an inactive virtual disk that has been added to a system. 
This option is only available when the selected virtual disk is currently inactive.

 

NOTE: 

Do not migrate a volume or hotspares to a different system unless that 

system does not currently have the maximum number of virtual disks and hotspares. 
There is a maximum of 2 hot spares and 2 virtual disks supported globally. 
Hot spares only apply to a redundant volume if it is of the same type and at least 
the same capacity of the volume. Exceeding this number may result in 
undesirable behavior.

PERC H200.book  Page 56  Tuesday, July 13, 2010  4:15 PM