Sony HDCU-950 Manual Do Utilizador
2-23 (E)
HDCU-950 IMM
RETURN VIDEO input picture
Picture on the HDC-950/930 viewfinder
Edge-crop
S603-1, -3, -5, -7/DTX-1
S603-1, -3, -5, -7/DTX-1
→ ON
S603-2, -4, -6, -8/DTX-1
→ OFF
The rightmost end and the leftmost end are
cut and replaced by black on the viewfinder.
cut and replaced by black on the viewfinder.
Edge-crop
How to set the aspect ratio
1.
1.
Set RETURN SET switch on the DTX-1 board panel to SD.
2.
Set the switch S601 (SD RETURN FORMAT) on the DTX-1 board, to SDI.
3.
Set S603 (SD RET ASPECT) and S604 (LB ASPECT) on the DTX-1 board according to the desired
aspect ratio.
For more details, refer to Section 1-6-5, “Setting of Switches on Boards
aspect ratio.
For more details, refer to Section 1-6-5, “Setting of Switches on Boards
_DTX-1 Board”.
Examples of display
Squeeze
S603-1, -3, -5, -7/DTX-1
S603-1, -3, -5, -7/DTX-1
→ OFF
S603-2, -4, -6, -8/DTX-1
→ ON
The same picture as the camera output
picture is shown.
picture is shown.
Squeeze
Letter box
Letter box (16 : 9)
S603-1 to -8/DTX-1
S603-1 to -8/DTX-1
→ ON
S604-1 to -8/DTX-1
→ OFF
The same picture as the camera output
picture is shown.
picture is shown.
2-5. Video Signal System