Regency IG35-NG Manual Do Utilizador

Regency IG35 Gas Inbuilt Fireplace

11) Position notch in Front Right Log G)02-48 

on Log F)02-47 and push the bottom right 
edge against the bracket on the burner 
tray.

12) Test fi re to ensure proper light off. Ensure  

fl ame fl ows smoothly from one end of the 
burner to the other.  If there is any fl ame 
hesitation, check the area for any blockage 
of the burner port.   

10) Place the notch in Center Log F)02-47 over 

Log E)02-45 and across the cutout on Log 
A)02-65.

1)  Carefully remove the logs from the box and 

unwrap them.  The logs are fragile, handle 
with care - do not force into position.

2)  Sprinkle the embers on the front, left and 

right sides of the fi rebox base. 

3)  Place Side Log 02-50 on the right side of 

the grate on the fi rebox base. 

 

Position log as desired ensuring the log 
DOES NOT interfere with the fl ame. Possible 
positioning shown in diagrams below.

 

4)  Place Side Log 02-52 on the left side of the 

grate on the fi rebox base.

 

Position log as desired ensuring the log 
DOES NOT interfere with fl ame. Possible 
positioning shown in diagrams below.

5) Test fi re to ensure proper light off. Ensure  

fl ame fl ows smoothly from one end of the 
burner to the other.  If there is any fl ame 
hesitation, check the area for any blockage 
of the burner port.