Hitachi L200 Manual Do Utilizador

L200 Inverter

Oper

ations

and Monitor

ing

If you assign the [SET] function to an intelligent input terminal, you can select between 
two sets of motor parameters. The second parameters store an alternate set of motor 
characteristics. When the terminal [SET] is turned ON, the inverter will use the second 
set of parameters to generate the frequency output to the motor. When changing the state 
of the [SET] input terminal, the change will not take effect until the inverter is stopped.

When you turn ON the [SET] input, the inverter operates per the second set of parame-
ters. When the terminal is turned OFF, the output function returns to the original settings 
(first set of motor parameters). Refer to 

08

SET

Set (select) 2nd 
Motor Data

ON

causes the inverter to use the 2nd set of motor 
parameters for generating the frequency output 
to motor

OFF

causes the inverter to use the 1st (main) set of 
motor parameters for generating the frequency 
output to motor

C001, C002, C003, C004, 
C005

(none)

If the terminal state is changed while the inverter is 
running, the inverter continues using the current set 
of parameters until the inverter is stopped.

Example (requires input configuration—see 
page 

See I/O specs on page 

.

SET

1

2

3

4

5

L

PCS