Hitachi L200 Manual Do Utilizador

L200 Inverter

Getting Star

ted

The L200 inverter can connect to an external 
digital operator via the front panel serial port 
connector. The separate keypad is shown to the 
right (part no. OPE–SRmini). This allows you 
to operate the inverter remotely, as shown 
(below left). A cable (part no. ICS–1 or ICS–3, 
1m or 3m) connects the modular connectors of 
the keypad and inverter.

Hitachi provides a panel mount keypad kit 
(below, right). It includes the mounting flange, 
gasket, keypad, and other hardware. You can mount the keypad with the potentiometer 
for a NEMA1 rated installation. The kit also provides for removing the potentiometer 
knob to meet NEMA 4X requirements, as shown (part no. 4X–KITmini).

Digital Operator Copy Unit - The optional 
digital operator / copy unit (part no. SRW-0EX) 
is shown to the right. It has a 2-line display that 
shows parameters by function code and by name. 
It has the additional capability of reading 
(uploading) the parameter settings in the inverter 
into its memory. Then you can connect the copy 
unit on another inverter and write (download) the 
parameter settings into that inverter. OEMs will 
find this unit particularly useful, as one can use a 
single copy unit to transfer parameter settings 
from one inverter to many.

Other digital operator interfaces may be available 
from your Hitachi distributor for particular indus-
tries or international markets. Contact your 
Hitachi distributor for further details.