Kenwood NX-210 Manual Do Utilizador
0
S
electing
A
Z
one
And
c
hAnnel
/g
roup
id
Select the desired zone using
/
(default). Each zone
contains a group of channels.
Select the desired channel/group ID using the Selector knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.
• You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu {page 2}.
Note:
If the default settings for
/
and the Selector knob
have been changed, use the appropriate keys to select the zone
and channel/group ID.
t
rAnSmitting
1
Select the desired zone and channel/group ID.
2
Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3
Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
• For best sound quality, hold the transceiver approximately
. inches (3 ~ 4 cm) from your mouth.
■
Making Group Calls (Digital)
If a key has been programmed with Group or Group +
Status
, you can select a group ID from the list to make a
call to those parties. To select a group ID:
1
1
Press the key programmed as Group or Group + Status.
2
Press
/
to select a group ID/name from the list.
3
Press and hold the PTT switch to make the call.
• Speak into the transceiver as you would during a normal
transmission.