Kenwood TH-255A Manual Do Utilizador
20
■
Selecting an Offset Frequency
To access a repeater which requires an odd-split frequency pair,
change the offset frequency from the default which is used by
most repeaters.
1 Enter Menu mode and access Menu No. 2 (OFFSET).
2 Press [MENU], then rotate the Selector (or press [UP]/
1 Enter Menu mode and access Menu No. 2 (OFFSET).
2 Press [MENU], then rotate the Selector (or press [UP]/
[DOWN]) to select the appropriate offset frequency value.
• The selectable range is from 0.000 MHz to 29.950 MHz, in
• The selectable range is from 0.000 MHz to 29.950 MHz, in
steps of 50 kHz.
3 Press [MENU] to store the setting.
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
Menu mode.
Note: After changing the offset frequency, the new offset
frequency will also be used by Automatic Repeater Offset (K type
only).
A
ctiVAting
the
t
one
F
unction
Press
[F], [1] to turn the Tone function ON.
• Continually press
[F], [1] to toggle the functions as follows: Tone
ON >> CTCSS ON >> DCS ON >> OFF.
• The “ ” icon appears when the Tone function is ON.