Kenwood TH-255A Manual Do Utilizador
50
DTMF TX H
olD
This function causes the transceiver to remain in Transmission
Mode for 2 seconds after you release each key. So, you can release
[PTT] while sending the DTMF tones.
1 Enter Menu mode and access Menu No. 21 (DT.H).
2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN])
1 Enter Menu mode and access Menu No. 21 (DT.H).
2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN])
to select “ON”.
3 Press [MENU] to store the setting.
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
Menu mode.
a
uToMaTic
D
ialer
If you use the 10 dedicated memory channels to store DTMF codes,
you do not need to remember a long string of digits.
■
Storing a DTMF Code in Memory
1 Enter Menu mode and access Menu No. 19 (DTMF.MR).
2 Press [MENU], then rotate the Selector (or press [UP]/
2 Press [MENU], then rotate the Selector (or press [UP]/
[DOWN]) to select your desired DTMF memory channel
number from 0 to 9.
3 Press [MENU].
• The DTMF code entry display appears and the last digit
blinks.
4 Rotate the Selector (or press [UP]/ [DOWN]) to select a
DTMF code.