Kenwood TM-281E Manual Do Utilizador

28

In Memory Channels, you can store frequencies and 
related data that you frequently use so that you do not 
need to reprogram that data every time.  You can quickly 
recall a programmed channel through simple operation.  
A total of 200 Memory Channels (100 when using 
the Memory Name function) are available for storing 
frequencies, modes, and other operating conditions.

The transceiver must be configured to either 200 Memory 
Channels without using the Memory Name function or 
100 Memory Channels with the Memory Name function 
(default).

To change the Memory Channel capacity:

1 Press 

[F], [MENU] and turn the Tuning control to 

select Menu No. 15 (M.CH).

2 Press 

[MENU] and turn the Tuning control to select 

either “100” (default) or “200”.

3 Press 

[MENU].

• “SURE 

?” 

appears.

4 Press 

[MENU] to accept or press any other key to 

cancel. 

◆

  If you change the Memory Channel capacity from 200 channels to 

100 channels after having stored data in channels 100 to 199, all 
Memory Channel data in channels 100 to 199 will be erased.   

◆

  If you change the Memory Channel capacity from 100 channels to 

200 channels after storing Memory Names in those channels, the 
Memory Name data will be erased.

You can use each Memory Channel as a simplex & 
repeater channel or an odd-split channel.  Store only 
1 frequency to use as a simplex & repeater channel or 
2 separate frequencies to use as an odd-split channel.  
Select either application for each channel depending on 
the operations you have in mind.

Simplex & repeater channels allow:

•  Simplex frequency operation

•  Repeater operation with a standard offset (if an offset 

direction is stored)

Odd-split channels allow:

•  Repeater operation with a non-standard offset

Note:  Not only can you store data in Memory Channels, but you can 
also overwrite existing data with new data.