Honeywell E-EQ-MX3PLUSOGWW Manual Do Utilizador
Chapter 2: Set Up A New MX3Plus
This page lists a quick outline of the steps you might take when setting up a new MX3Plus. More instruction for each step is
listed later in this guide. Please refer to the MX3Plus Reference Guide for additional information and instruction.
listed later in this guide. Please refer to the MX3Plus Reference Guide for additional information and instruction.
Contact
if you need additional help.
Note:
Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the MX3Plus, and components from electrostatic discharge.
Hardware Setup
1. Connect accessories.
2.
.
3.
4. Press the Power key.
Software Setup
Prerequisite: Hardware setup is complete.
1.
2.
3.
4.
5.
6. Setup Wireless client parameters
7. Setup
parameters
8.
to the registry
9. Setup the AppLock parameters
10. Set the Scanner Wedge parameters
Please refer to the MX3Plus Reference Guide for additional information and instruction.
End User License Agreement (EULA)
When a new MX3Plus starts up a EULA is displayed on the touch screen. It remains on the screen until the Accept or Decline
button is tapped with a stylus.
button is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the MX3Plus continues the startup process. The EULA is not presented
to the user again.
to the user again.
Tap the Decline button to decline the EULA and the MX3Plus will reboot. It will continue to reboot until the Accept button is
tapped with the stylus.
tapped with the stylus.
Note:
The EULA will be presented after any operating system upgrade or re-installation, including language-specific
operating systems.
2-1