Garmin 190-01098-00 Manual Do Utilizador

Advanced Operation

4.  Select from the following options:

—save your changes and return to the previous screen. 

—remove your changes. 

You can adjust the unit of measure that is displayed for the speed calculation throughout 

the radio. The Speed Over Ground (SOG) on the Home screen will be displayed in the 

measurement you select here.

1.  Press the 

 key.

2.  Select 

 > 

 > 

.

3.  Select from the following options:

—change the unit of measure to knots.

—change the unit of measure to miles per hour.

—change the unit of measure to kilometers per hour.

You can modify the heading to display either true or magnetic calculations. This heading 

measurement is displayed throughout the radio including Course Over Ground (COG) on 

the Home screen.

1.  Press the 

 key.

2.  Select 

 > 

 > 

.

3.  Select from the following options:

—change the calculation to reflect true north.

—change the calculation to reflect magnetic north.

NOTE: If your radio is configured for NMEA 2000 communication, you cannot select 

TRUE or MAGNETIC. Your radio displays AUTO as the setting and displays heading 

data based on the information provided over the network (PGN 129026 – COG/SOG, Rapid 

Update).

You can switch between the USA, International, or Canadian frequency bands. For a list of 

pages 36–43

.

NOTE: The International frequency band is the only band available for the VHF 300i and 

the VHF 300i AIS, unless you have the other bands enabled by an Garmin authorized dealer.

1.  Press the 

 key.

2.  Select 

 > 

 > 

.

3.  Use the Channel knob to select 

, 

, or 

.