Xantrex Technology XS400 Manual Do Utilizador
Operation
3–4
975-0054-01-01
Using the S400 Remote Switch
The S400 Remote Switch performs the same function as the On/Standby
switch on the XS400.
switch on the XS400.
Invert mode use
only
only
The S400 Remote Switch provides On/Standby control only when the
XS400 is operating in invert mode.
XS400 is operating in invert mode.
To use the S400 Remote Switch, the On/Standby switch on the XS400
must be turned to the On ( ) position. See “Operating in Invert Mode” on
page 3–5.
must be turned to the On ( ) position. See “Operating in Invert Mode” on
page 3–5.
Purpose
The S400 Remote Switch provides remote control of the XS400 from a
convenient location of up to 25 feet (7.5 meters) away using the supplied
telephone cable.
convenient location of up to 25 feet (7.5 meters) away using the supplied
telephone cable.
Cable length
You can use a longer cable up to a maximum recommended length of 50
feet (15 meters). Xantrex recommends using a high quality 4-wire
telephone cable with 6-position, 4-contact connectors.
feet (15 meters). Xantrex recommends using a high quality 4-wire
telephone cable with 6-position, 4-contact connectors.
Important: When shore power is present, the S400 Remote Switch
will not change the operation of the inverter.
will not change the operation of the inverter.
Figure 3-2 S400 Remote Switch
Inverter ON