Kenwood TK-5410 Manual Do Utilizador

2

■

 

Channels programmed for Conventional P2 and Trunking 

P2 operation already have a Group ID assigned.  For 

these channels, simply press and hold the 

PTT switch to 

make the call.

•  On Trunking channels, if the traffic channel is busy, a busy 

message appears and the busy tone sounds.  Release the 

PTT switch and wait for the channel to become free.  When the 

traffic channel becomes free, a proceed tone sounds.

 

Otherwise, on K2/K3/K/K/K7 model transceivers, if a key 

has been programmed with 

Talkgroup (Conventional P2 

only), you can select a group ID from the list to make a call 

to those parties.  To select a group ID:
1  Press the key programmed as Talkgroup.
2  Press the Side 2 and Side 3 keys or the <C and D> 

keys to select a group ID/name from the list that has 

been pre-entered into your transceiver.

•  The target group ID/name appears on the display.

3  Press the Side 1 key to set the selected group ID.
4  Press and hold the PTT switch to make the call.  Speak 

into the transceiver as you would during a normal 

transmission.