Kenwood TK-5410 Manual Do Utilizador

2

■

 

An ID code is a combination of a 3-digit Fleet number and 

a -digit ID number.  Each transceiver must have its own 

Fleet and ID number.

•  Enter a Fleet number (00 ~ 3) to make a group call.
•  Enter an ID number (000 ~ ) to make an individual call in 

your fleet.

•  Enter a Fleet number to make a call to all units in the selected 

fleet (Fleet call).

•  Enter an ID number to make a call to the selected ID in all 

fleets (Supervisor call).

•  Select “ALL” Fleet and “ALL” ID to make a call to all units 

(Broadcast call).

Note:  The ID range may be limited by programming.

 You can send and receive 2-digit Status messages which may 

be decided in your talk group.  Messages can contain up to  

alphanumeric characters.  Status messages range from 0 to 

 (80 ~  are reserved for special messages).
 A maximum of  received messages can be stored in the 

stack memory of your transceiver.  These saved messages 

can be reviewed after reception.  Depending on your dealer 

settings, when the stack memory is full, either the oldest 

message will be erased when a new message is received or 

the new message will not be stored in the stack memory.  The 

 icon lights when a message is stored in the stack memory.