Whirlpool SF302BSE Manual Do Utilizador
23
S
URFACE
BURNERS
CAUSE
•
The pilot light is extinguished. Light the pilot. (See “Lighting standing pilots”
on page 7.)
on page 7.)
•
The burner ports may be clogged. Clean them with a straight pin. (See pages
17 and 18.)
17 and 18.)
•
The burner ports may be clogged. Clean them with a straight pin. (See pages
17 and 18.)
17 and 18.)
•
The burner needs cleaning. (See page 17.)
•
The air/gas mixture is incorrect. Contact an authorized Whirlpool service
technician to check the air/gas mixture or see the Installation Instructions.
technician to check the air/gas mixture or see the Installation Instructions.
•
The burner is wet from washing. Let it dry.
PROBLEM
The burner fails to light
The burner flames are
uneven
uneven
The burner flames lift off
the ports, are yellow, or
are noisy when turned off
the ports, are yellow, or
are noisy when turned off
The burner makes a
popping noise when on
popping noise when on
PROBLEM
Cooking results are
not what you expected
not what you expected
CAUSE
•
You did not preheat the oven before baking (if called for in the recipe).
•
The recipe you are using may need to be altered to improve the taste or
appearance of the food.
appearance of the food.
•
You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
cookbook or recipe for the recommended pan type and size.
•
There is not enough air space around the pan when baking. Allow 1
1
⁄
2
to 2
inches of air space on all sides of the pan.
•
The flame size does not fit the cookware being used.
•
When broiling, you have not completely closed the broiler door.
•
The flow of combustion and/or ventilation air to the range is blocked. Make
sure nothing is blocking the middle front of the backguard or the floor right
in front of the broiler.
sure nothing is blocking the middle front of the backguard or the floor right
in front of the broiler.
•
The range is not level. (See the Installation Instructions.)
C
OOKING
RESULTS
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 24.
TROUBLESHOOTING