Avanti BCAD353 Manual Do Utilizador
10
OPERATING YOUR BEVERAGE COOLER
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78 ºF (22º - 26ºC). If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be
reached.
Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).
78 ºF (22º - 26ºC). If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be
reached.
Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).
Attention
This unit is equipped with a power delay system to protect the compressor in the event of a
power outage.
This unit is equipped with a power delay system to protect the compressor in the event of a
power outage.
• This power delay system will delay the compressor start cycle for “3” three minutes
both at the first time the unit is plugged in and when there is a power outage.
• Once the unit is plugged in for the first time or power has been restored to the unit,
the compressor will start cycling after (3) three minutes of uninterrupted power
supply.
supply.
• Digital display, LED Lighting and temperature settings will work as normal and not
be affected.
ON/OFF POWER
Your unit is designed to turn ON as soon as the power cord has been plugged into an active electrical
outlet.
outlet.
Setting the Temperature Control
• Your unit has only one control for regulating the temperature in
the compartment. The temperature control is located on the upper
left hand side of the compartment.
left hand side of the compartment.
• The range of the temperature control is from “34ºF” to “43ºF”.
• The first time you turn the unit on, press the set button and then
• The first time you turn the unit on, press the set button and then
press the
“DOWN” button to set the temperature to “34ºF”.
• After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs; by
first pressing the Set button then, pressing the
or
buttons .
• To turn the off the cooling system, unplug the unit from the electrical outlet.
NOTE:
• Also, as cold air falls and warm air rises, there could be a slight temperature variance between
NOTE:
• Also, as cold air falls and warm air rises, there could be a slight temperature variance between
the top and bottom shelves.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
to store may vary.
IMPORTANT SAFEGUARDS
Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent
spoilage.
As a natural result of condensation, in summer months or areas of high humidity, the glass door
may build up moisture on the outside. Just wipe it away.
spoilage.
As a natural result of condensation, in summer months or areas of high humidity, the glass door
may build up moisture on the outside. Just wipe it away.