Marvel 6GARMP Manual Do Utilizador

Your product is equipped with a cantilever shelf system to pro-

vide you with maximum adjustability and customization options 

through the purchase of aftermarket shelving.

The basic cabinet comes with 3 glass shelves which can be 

positioned anywhere in the cabinet. The glass half shelf allows 

storage of tall bottles or opened wine bottles on the shelf below. 

(See Figure 15). The fixed wooden bottle cradle at the bottom of 

the cabinet will hold 6 bottles of wine. The wooden, bottom bot-

tle cradle may be removed for storing “jug” wines.  Just remove 

the two (2) screws that secure the cradle to the cabinet floor.

 

The bottles or cans on the top shelf directly under the light will 

be exposed to a slightly higher temperature when the light is on.  

Position your product accordingly and REMEMBER TO TURN OFF 

THE LIGHT WHEN IT IS NO LONGER NEEDED.

12

Glass 

shelves

Wine bottle 

cradle

Tall bottle

storage area

Remove stored product from the shelf. Do not try to remove 

a loaded shelf from the unit. Grasp the shelf front with both 

hands, rotate the front upward and lift out.  (See Figure 16).  To 

install a shelf insert the shelf in the unit and insert the hooks into 

the shelf support slots and drop the shelf down so the hooks 

drop over the bottom of the slots. 

Rear tang

(hook) on 

shelf

Shelf support 

slot

Installed shelf 

tang

Grasp the shelf on 

the wood front

Make sure the shelf is secure 

before loading the shelf.

Figure 15

Figure 16