Alpine IXA-W407BT Manual Do Utilizador
16
-EN
Source Setup Operation
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [
] of Source Setup.
The SOURCE SETUP screen appears.
3
Touch the title of your desired setup mode.
Radio Setup/Bluetooth Setup*
1
/USB Setup
*
1
Displayed when “Bluetooth IN” is set to BUILT-IN (page 23).
• When the current source is Radio, USB or iPod, you can also recall
the SETUP list of the current source directly by pressing SETUP.
4
Touch [
], [
] or [
], etc. of the desired item to
change its setting.
Radio Setup:
RDS Clock Disp
*
2
/ FM Level / PI Seek / RDS Regional /
PTY Language / PTY31
*
2
Displayed only when T/ZONE is OFF (page 19).
Bluetooth Setup:
Paired Device / Device Search / Clear Device / Service Provider /
Visible Mode / Auto Answer / Speaker Sel / Mic Input /
Firmware Version / Firmware Update
Visible Mode / Auto Answer / Speaker Sel / Mic Input /
Firmware Version / Firmware Update
• For BLUETOOTH Setup details, refer to “BLUETOOTH Setup”
USB Setup:
Playlists / Artists / Albums / Podcasts / Audiobooks / Genres /
Composers / Songs / Skip Style
Composers / Songs / Skip Style
5
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
operation was started.
“Radio Setup” is selected on the source setup main menu in step 3.
RDS Time Display
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
time data sent from the RDS broadcast.
Setting item: RDS Clock Disp
Setting contents: OFF / ON
Setting contents: OFF / ON
Adjusting Source Signal Levels
If the difference in volume level between the iPhone/iPod and FM radio
is too great, adjust the FM signal level as follows.
is too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting contents: LOW / HIGH
Setting contents: LOW / HIGH
PI Seek Setting
When the PI Seek is set to “AUTO”, the unit searches again for a station
in the PI (Programme Identification) list.
in the PI (Programme Identification) list.
Setting item: PI Seek
Setting contents: OFF / AUTO
Setting contents: OFF / AUTO
Receiving RDS Regional (Local) Stations
When OFF is selected, the unit automatically keeps receiving the related
local RDS station.
local RDS station.
Setting item: RDS Regional
Setting contents: OFF / ON
Setting contents: OFF / ON
Switching the Display Language of PTY (Programme Type)
You can select one of the patterns of the display languages.
Setting item: PTY Language
Setting contents: GB / NL / F / D / I / E
Setting contents: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast) Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
Setting contents: OFF / ON
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to ON.
listening to when PTY31 is set to ON.
• The unit will show “ALARM” in the display during PTY31 reception.
Setup
Source Setup
The Parking Brake must be engaged to access the Source
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.
“Setting item” of Source Setup. Refer to each section for details.
Radio Setup
OFF: To adjust it manually.
ON:
Adjusts the clock automatically based on the time data.
In this case, the clock cannot be adjusted manually.
In this case, the clock cannot be adjusted manually.