Intel BOXDG41KR Manual Do Utilizador
ProCESSor
Processor Support
• Intel® Core™2 Quad** processor in the LGA775
package
• Intel® Core™2 Duo processor in the LGA775 package
• Intel® Pentium® processor in the LGA775 package
• Intel® Celeron® processor in the LGA775 package
• Supports Intel® 64 architecture
3
CHiPSEt
intel® G41 Express Chipset
• Intel® 82G41 Graphics and Memory Controller
Hub (GMCH)
• Intel® 82801GB I/O Controller Hub (ICH7)
Graphics Memory Controller Hub (GMCH)
Graphics Memory Controller Hub (GMCH)
• Designed to support up to 4 GB
1
of system
memory using DDR3 1066 / 800 SDRAM memory
• Intel® Fast Memory Access
• Intel® Graphics Media Accelerator X4500 with
Intel® Clear Video Technology
intel® i/o Controller Hub (iCH)
intel® i/o Controller Hub (iCH)
• Four SATA (3.0 Gb/s) ports
• Integrated 10/100/1000 network connection
• Eight Hi-Speed USB 2.0 ports (four back panel
ports and an additional four USB ports via two
internal headers)
System bioS
System bioS
• 16 Mb Flash EEPROM with Intel® Platform
Innovation Framework for EFI Plug and Play, IDE
drive auto-configure
• Advanced configuration and power interface
V2.0b, DMI 2.0, multilingual support
• Serial Peripheral Interface (SPI) Flash
For ordering information, visit www.intel.com
For the most current product information, visit
For the most current product information, visit
http://developer.intel.com/products/desktop/motherboard/
1
System resources and hardware (such as PCI and PCI Express*) require physical memory address locations that can reduce available addressable system memory. This could result in a reduction of as much
as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration and operating system.
2
Intel® High Definition Audio requires a system with an appropriate Intel® chipset and a motherboard with an appropriate codec and the necessary drivers installed. System sound quality will vary depending
on actual implementation, controller, codec, drivers, and speakers. For more information about Intel® HD Audio, refer to www.intel.com/design/chipsets/hdaudio.htm
3
64-bit computing on Intel® architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel® 64 architecture. Processors will not
operate (including 32-bit operation) without an Intel 64 architecture-enabled BIOS. Performance will vary depending on your hardware and software configurations. See http://developer.intel.com/technology/
intel64/index.htm for more information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS
IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY,
OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Actual Intel® Desktop Board may differ from the image shown.
Intel, the Intel logo, Intel Core, Pentium, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
** Supports 95 W Thermal Design Power, Intel® Core™2 Quad Processors with 1333 / 1066 MHz system bus. For information, visit http://processormatch.intel.com
Copyright © 2009 Intel Corporation. All rights reserved. 0909/TC/MS/PDF 322645-001US
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Actual Intel® Desktop Board may differ from the image shown.
Intel, the Intel logo, Intel Core, Pentium, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
** Supports 95 W Thermal Design Power, Intel® Core™2 Quad Processors with 1333 / 1066 MHz system bus. For information, visit http://processormatch.intel.com
Copyright © 2009 Intel Corporation. All rights reserved. 0909/TC/MS/PDF 322645-001US
Intel® Desktop Board DG41KR Classic Series
Technical Specifications
SYStEM MEMorY
Memory Capacity
• Two 240-pin DIMM connectors supporting
up to four double-sided DIMMs
Memory types
Memory types
• DDR3 1066 / 800 SDRAM memory support
• Non-ECC Memory
Memory Modes
Memory Modes
• Dual- or single-channel operation support
Memory Voltage
Memory Voltage
• 1.8 V
Hardware Management features
Hardware Management features
• Processor fan speed control
• System chassis fan speed control
• Voltage and temperature sensing
• Fan sensor inputs used to monitor fan activity
• Power management support for ACPI 1.0b
Expansion Capabilities
Expansion Capabilities
• Two PCI bus add-in card connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 graphics connector
• Parallel ATA 100 / 66 devices
Headers
Headers
• One serial port header
JuMPErS ANd froNt-PANEL CoNNECtorS
Jumpers
• Single configuration jumper design
• Jumper access for BIOS maintenance mode
front-Panel Connectors
• Reset, HDD LED, Power LEDs, power on / off
• Two front-panel Hi-Speed USB 2.0 headers
• Front-panel audio header
MECHANiCAL
board Style
• ATX 2.2-compliant
board Size
board Size
• 9.6” x 8.6” (24.38 cm x 21.84 cm)
baseboard Power requirements
baseboard Power requirements
• ATX 12 V
ENViroNMENt
operating temperature
• 0° C to +55° C
Storage temperature
Storage temperature
• -20° C to +70° C
rEGuLAtioNS ANd SAfEtY StANdArdS
united States and Canada
CSA / UL 60950-1, First Edition (Binational Standard)
Europe
Europe
(Low Voltage Directive 2006 / 95 / EC)
EN 60950-1:2006
international
international
IEC 60950-1:2001, First Edition
EMC regulations (tested in representative chassis)
EMC regulations (tested in representative chassis)
united States
FCC 47 CFR Part 15, Subpart B
Canada
Canada
ICES-003 Class B
Europe
(EMC Directive 2004 / 108 / EC)
EN 55022:2006 and EN 55024:1998
Australia / New Zealand
Australia / New Zealand
EN 55022:2006 Class B
Japan
Japan
VCCI V-3 / 04.04, V-4 / 03.04, Class B
South Korea
South Korea
KN-22:2005 and KN-24:2005
taiwan
taiwan
CNS 13438:2006 Class B
international
international
CISPR 22:2005 +A1:2005 +A2:2006 Class B
Environmental Compliance
Europe
Environmental Compliance
Europe
Europe RoHS (Directive 2002 / 95 / EC)
China
China
China RoHS (MII Order # 39)
Lead-free: The symbol is used to identify
electrical and electronic assemblies and
components in which the lead (Pb) concen-
tration level in any of the raw materials and the end
product is not greater than 0.1% by weight (1000 ppm).
This symbol is also used to indicate conformance
to lead-free requirements and definitions adopted
under the European Union’s Restriction on Hazardous
Substances (RoHS) directive, 2002 / 95 / EC.