HP (Hewlett-Packard) dx2100 MT Manual Do Utilizador

1. Prepare the computer for disassembly (

).

2. Remove the access panel (

).

3. Remove the front bezel (

Section 6.3, “Front Bezel”)

.

4. Disconnect the power, and data cables from the back of all installed drives.

5. Disconnect all cables from the system board.

6. Remove the heatsink from the system board (

).

7. Remove the 6 screws that secure the system board to the chassis 1.

8. Slide the system board towards the front of the chassis 2 then, angle the back of the board up 

to remove it 3.

✎

The system board in the computer may look slightly different from the one shown here.

To install the system board, reverse the removal procedure.

✎

After installing a new system board, always update the system ROM to ensure that the latest 
version of the BIOS is being used on the computer. The latest system ROM BIOS can be found 
on the Web at: http:\\h18000.www1.hp.com/support/files.