Hoshizaki KML-250MAH Manual Do Utilizador

14

The installer must ensure the dispenser unit/ice storage bin is compatible with 
the icemaker, and the dispenser unit/ice storage bin and icemaker are properly 
attached and secured.

1a) 

Dispenser Unit: Follow the dispenser unit's setup procedure.

1b) 

Ice Storage Bin: Unpack the ice storage bin and attach the 4 adjustable legs provided 

(bin accessory) to the bottom of the ice storage bin.

2) Position the dispenser unit/ice storage bin in its permanent location.
3) If required, install an adapter kit or top kit. Contact your local Hoshizaki distributor for 

recommendations.

4) Level the dispenser unit/ice storage bin in both the left-to-right and front-to-rear 

directions. If using an ice storage bin, adjust the ice storage bin legs to level.

5) Place the icemaker on top of the dispenser unit/ice storage bin.

6a) 

Dispenser Unit: Follow the dispenser unit, adapter kit, or top kit instructions for 

securing the icemaker. If no instructions are available, secure the icemaker using the 
mounting brackets provided. Rotate the mounting brackets so that they fit flush to the 
dispenser unit. See Fig. 2a. Secure the mounting brackets to the icemaker with the bolts 
provided. Secure the mounting brackets to the dispenser unit with self-tapping screws 
(not provided). 

NOTICE! Use care to avoid damage to dispenser unit components 

6b) 

Ice Storage Bin: Follow the ice storage bin, adapter kit, or top kit instructions for 

securing the icemaker. If no instructions are available, secure the icemaker using the 
2 mounting brackets and the bolts provided. See Fig. 2b.

Icemaker

Bolts

Mounting 

Brackets

Dispenser 

Unit

Self-Tapping 

Screws 

(Not Provided)

Icemaker

Bolts

Mounting 

Brackets

Ice 

Storage 

Bin