GE Monogram ZCGP150LII Folheto

Página de 2
R
Dimensions and Installation Information (in inches)
R
Listed by 
Underwriters 
Laboratories
For answers to your Monogram,
® 
GE Profile
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
Specification Revised 10/05
160008
This compactor is designed as a built-in appliance  
only. It may be located in any convenient space  
under a countertop. 
DO NOT OPERATE FREE-STANDING because the compactor 
will tip over when the drawer is pulled out.
Additional Specifications: A 115 Volt, 60 Hz. power supply  
is required. An individual properly grounded branch circuit 
protected by a 15- or 20-amp circuit breaker or time delay 
fuse is recommended. Install a properly grounded 3-prong 
electrical receptacle recessed into the back wall. Electrical 
outlet location is critical for proper cord storage when  
compactor is installed.
If the compactor is to be located in or near a corner of base 
cabinets, allow 6” minimum clearance from the corner for 
bag removal on the right side. 
Front View (not to scale) 
34" - 35"
24"  
min. 
Clearances: Allow 6" clearance 
to a vertical wall on the right side 
for bag removal. Allow 23" at the 
front for a full drawer opening.
15-1/8" 
min.
Locate the outlet 18" min.  
from the floor, 3" min.  
from either side.
23"
33-3/4" min. 
to
35" max.
14-7/8"
34" - 35"
24"  
min. 
Clearances: Allow 6" clearance 
to a vertical wall on the right side 
for bag removal. Allow 23" at the 
front for a full drawer opening.
15-1/8" 
min.
Locate the outlet 18" min.  
from the floor, 3" min.  
from either side.
23"
33-3/4" min. 
to
35" max.
14-7/8"
34" - 35"
24"  
min. 
Clearances: Allow 6" clearance 
to a vertical wall on the right side 
for bag removal. Allow 23" at the 
front for a full drawer opening.
15-1/8" 
min.
Locate the outlet 18" min.  
from the floor, 3" min.  
from either side.
23"
33-3/4" min. 
to
35" max.
14-7/8"
 
ZCGP150LII - 
GE Monogram
 15" Built-In Compactor
 for Custom Panels
3/4
Thick
Custom 
Panel
29-5/16
14-7/8