Manitowoc Ice KH0179 Folheto

 

1.  Set adapter on top of the dispenser.  Position the bin cover so that the front flange of the bin cover will lock under the 

front lip of the dispenser.  Adapter may have to be moved towards the back of the dispenser. 

2.  Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.  

NOTE:  Do not drill deeper than 1/4” past the sheet metal.  Use a drill stop! 

3.  Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit. 
4.  Set the ice machine on top of the adapter.  Align holes in ice machine front angle with the rivnuts on the adapter. 
5.  Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit. 
6.  Set the front bin cover onto the dispenser.  The back flange of the bin cover will latch onto the adapter. 
7.  Rotate retaining arms into position, as shown for normal ice machine operation. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
Manitowoc Ice, Inc.                                                                                                                                                           

 

2110 South 26

th

 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                   

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                                                   8006693                     
Web Site - www.manitowocice.com                                                                                                                                      

     Rev. 06/17/03     

#8-32 Screw 
Two (2) Places 

 
Adapter 
 

RH Retaining Arm 

LH Retaining Arm 

Bin Cover 

#8 Screw 
4  Places