Hoshizaki KM-1301SRH/3 Manual Do Utilizador

64

[] Cloudy or irregular 

cubes.

a) Evaporator 

1. Frozen up.

1. See chart . 

. Scaled up.

. Clean

3. Damaged.

3. Replace.

b) Water System

1. Water supply line 

too small; requires 
1/" OD line dedicated 
per machine.

1. Increase water line size.

. Water filter clogged or 

flow rate too small.

. Replace filter or install a 

higher flow rate filter.

3. High hardness or 

contains impurities.

3. Install a water softener or 

filter.

c) Spray Guide

1. Dirty.

1. Clean.

[1] Icemaker will not stop 

when bin is filled with 
ice.

a) Thermostatic Bin 

Control

1. Set too cold.

1. See "IV.C. Bin Control 

Check."

. Defective.

. Replace.

[] Abnormal noise.

a) Pump Motor

1. Bearings worn out.

1. Replace.

b) Fan Motor (except 

water-cooled model)

1. Bearings worn out.

1. Replace.

. Fan blade deformed.

. Replace.

3. Fan blade does not 

move freely.

3. Replace.

c) Compressor

1. Bearings worn out or 

cylinder valve broken.

1. Replace.

. Mounting pad out of 

position.

. Reinstall.

d) Refrigerant Lines

1. Rub or touch other 

lines or surfaces.

1. Reposition.

[3] Ice in storage bin 

often melts.

a) Drain Line(s)

1. Plugged.

1. Clean.

b) Icemaker and Bin

1. Drains not run 

separately.

1. Separate the drain lines.

c) Ice Cube Guide

1. Out of position. 

Circulated water falls 
into bin.

1. Place in position.