Perlick H50IMS-ADL Manual Do Utilizador

29

This icemaker must be maintained individually, referring to the instruction 
manual and labels provided with the icemaker.

To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a 
damp cloth containing a neutral cleaner to wipe off oil or dirt build up.

• Wash your hands before removing ice. Use the plastic scoop provided.
• The storage bin is for ice use only. Do not store anything else in the storage bin.
• Clean the scoop and the storage bin liner using a neutral cleaner. Rinse thoroughly 

after cleaning.

Check the condenser once a year, and clean if required by following the steps below. 
More frequent cleaning may be required depending on location. 

1. Move the control switch to the "OFF" position and unplug the unit from the 

electrical outlet before cleaning the condenser.

2. Condenser fins are sharp. Use care when cleaning.
   

1) Move the control switch to the "OFF" position and unplug the unit from the electrical 

outlet. 

2) Remove the 2 screws securing the front panel, then 

remove the panel. See Fig. 40. 

3) Remove the 2 screws securing the louver, then 

remove the louver.

4) Use a brush attachment on a vacuum cleaner to 

gently clean the condenser fins. Do not use too 
much force, otherwise the fins could be damaged.

5) Replace the louver and front panel in their correct 

positions. Ensure that the screws are securely in 
place.

6) Plug the unit back in. Move the control switch to the "ICE" position to start the automatic 

icemaking process. 

Front Panel

Louver

Screws

Screws

Condenser