Avaya 38HBK00001SCM Manual Do Utilizador
Wallboard Installation and Maintenance
INDeX Wallboard 10
INDeX Contact Centre Modules
Page 103
Installation & Maintenance
38HBK00001SCM - Issue 11 (05/01)
To mount the display, first hook the bottom of the two wall brackets into the bottom
rear channel recess of the display. See Figure 2
rear channel recess of the display. See Figure 2
Fig. 7
Push display flat against the wall and upwards to fully locate the bottom half of the
bracket. Allow display to then drop down onto the top edge of the 2 brackets to
obtain a locked fixing. To remove, reverse the above procedure.
bracket. Allow display to then drop down onto the top edge of the 2 brackets to
obtain a locked fixing. To remove, reverse the above procedure.
Note: The display can be adjusted by sliding sideways in both directions.
Ceiling Mounting
From the mounting kit provided, fix the ceiling hanging wires and adjust to the height
required. See Figure 8.
required. See Figure 8.
Warning
Ensure the ceiling can support the weight of the wallboard prior to fixing.
Ensure the ceiling can support the weight of the wallboard prior to fixing.
Fig. 8
Slide in the 2 ends of the hanging wires into the top groove of the display housing
through the pre-drilled centre hole. Centre the display on the hanging wires. See
Figure 9.
through the pre-drilled centre hole. Centre the display on the hanging wires. See
Figure 9.
Fig. 9