Sanyo EMS-8500S Manual Do Utilizador

Página de 14
 
 
13
CLEANING AND CARE 
When cleaning surfaces of door and door 
jamb, use only mild, nonabrasive soap or 
detergents applied with a sponge or soft 
cloth. 
Turn off the oven and remove the power 
plug from the wall socket before cleaning. 
Keep the inside of the oven clean. When 
food splatters or spilled liquids adhere to 
oven walls, wipe with a damp cloth. Mild 
detergent may be used if the oven gets very 
dirty. Avoid the use of spray and other harsh 
cleaners as they may stain, streak or dull the 
door surface. 
The outside surfaces should be cleaned with 
a damp cloth. To prevent damage to the 
operating parts inside the oven, water 
should not be allowed to seep into the 
ventilation openings. 
Wipe the window on both sides with a damp 
cloth to remove any spills or spatters. 
Do not allow the control panel to become 
wet. Clean with a soft, damp cloth. When 
cleaning the control panel, leave oven door 
open to prevent oven from accidentally 
turning on. 
If steam accumulates inside or around the 
outside of the oven door, wipe with a soft 
cloth. This may occur when the microwave 
oven is operated under high humidity 
conditions, this is normal.
 
It is occasionally necessary to remove the 
glass tray for cleaning. Wash the tray in 
warm sudsy water or in a dishwasher. 
The roller ring and oven floor should be 
cleaned regularly to avoid excessive noise. 
Simply wipe the bottom surface of the oven 
with mild detergent. The roller ring may be 
washed in mild sudsy water or dishwasher. 
When removing the roller ring from cavity 
floor for cleaning, be sure to replace in the 
proper position. 
Remove odors from your oven by combining 
a cup of water with the juice and skin of one 
lemon in a deep bowl, microwave for 5 
minutes. Wipe thoroughly and dry with a soft 
cloth. 
When it becomes necessary to replace the 
oven light, please consult a dealer to have it 
replaced. 
SAVE THESE INSTRUCTIONS