Panasonic nn-cd989s Manual Do Utilizador

24

This feature allows you to program the oven as a kitchen 
timer. It can also be used to program a standing time after 
cooking is completed and/or to program a delay start.

Using Time/Weight Select Dial 
(up to 1 hour 30 minutes)

Time will count down without operating oven.

Set desired amount of 
stand time.
(up to 1 hour 30 minutes)

Press.
Cooking will start.  
After cooking, stand 
time will count down 
without oven operating.

Set desired amount of 
delayed time.
(up to 1 hour 30 minutes)

Press.
Delay time will count 
down. Then cooking 
will start.

NOTE:
1.  When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five 

times.

2.  If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will 

continue to count down.

3.  Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the 

starting temperature of food from rising before defrosting or cooking begins. A change in starting 
temperature could cause inaccurate results.

4.  Timer can be set up to 1 hour 30 minutes.