Bakers Pride VG8/C Manual Do Utilizador

7 

NOTICE: 

THE COMBINATION OF FACTS, DATA, DESIGN ELEMENTS, ENGINEERING DATA, MANUFACTURING DATA & ASSEMBLY DATA 

WHICH MAY BE CONTAINED IN THIS DOCUMENT ARE OF A PROPRIETARY NATURE TO BKI. 

THESE MATERIALS ARE NOT TO BE USED OR COPIED WITHOUT PRIOR WRITTEN PERMISSION FROM BKI. 

ALL RIGHTS ARE RESERVED.

 

 

 
Function Keys 
 
 
Hold :  
 
Starts the hold cycle of the program number shown in the display area.  
 
While in the programming mode, the hold button accesses the Hold time and temperature settings. 
 
Hold :   function allows the operator to hold the product in the oven at a reduced temperature 
(minimum 65

 
When Hold function is activated, display will show temperature and count time up from 0:00 (Zero) 
to the pre-set time limit. 
 
The “Xtra Time” button will only function if the “Hold” function has been programmed or the oven 
is above the hold temperature. 
 
 
Prog :   
 
Activates the Navigation keys allowing the operator to select a program number 
 
Enters the “Programming mode” allowing the operator to create pre-sets for Programs 1 –15. 

Pre-Heat : 
 
Starts the oven pre-heating, this function allows the operator to pre-heat the oven to the selected 
program first stage temperature before loading the oven with product.  
 
While in the programming mode, the Pre-heat button accesses Stage-1 cook time and temperature 
settings. 
 
 
Stop : 
 
A quick press of the Stop button ` pauses` the controller during a pre-heat or cook/hold cycle.  
Press and hold the Stop button to end a Pre-heat or Cook/Hold cycle. 
 
Note: the oven fans will continue to run for 20 seconds after the end of the Cook/Hold cycle, this is 
normal.