Kuppersbusch USA EKE 854.2 Manual Do Utilizador

6

KC 906.2 and EKE Users Guide USA with pan recognition

When pressing the plus sensor, 
the cooking zone starts at cooking 
setting 5, without boost.

When pressing the minus sen-
sor, the cooking zone starts at 
cooking setting 9.
This automatically starts the 
automatic boost.

Using the automatic boost function

All cooking zones are equipped with an automatic boost function. Maximum 
power is used for the boost. The time period of the boost depends on the 
selected cooking setting. After the elapsed time, the cooking zone automati-
cally switches back to the selected cooking setting.

If the cooking zone is yet not in use
– Press the minus sensor until the 

required cooking setting is dis-
played. The boost function 
switches on automatically.

During automatic operation an “A” 
lights up in the display alternately 
with the selected cooking setting.

If you are already using the cooking zone
– Press the plus sensor again 

after reaching cooking setting 9.
The automatic boost function is 
activated.

Select the required cooking set-
ting.

“A” lights up in the display alter-
nately with the selected cooking 
setting.

Switching off a cooking zone:

– Press the plus- and -minus sensor at the same time.

The “0” position is visible for about 2 seconds after the appliance switches off. 

Switching off the cooking surface

All the cooking zones can be 
switched off quickly with the off-
sensor.

Using a frying or dual-circuit cooking zone with-
out the pan recognition sensor

As a rule, only the smaller cooking zone diameter is heated. However, when 
using frying pans and large saucepans, you may decide to switch on the outer 
cooking zone circuit.

– Press the cooking zone symbol 

next to the plus/minus sensor.
A dot at the bottom right of the 
display for the cooking level in-
dicates that the function has 
been switched on.

– Pressing the cooking zone sym-

bol will once again deactivate 
the dual circuit cooking zone or 
frying zone.

To heat a frying pan, you can use the two small, 
closely adjacent cooking zones. The temperature 
must be controlled via the setting controls for both 
cooking zones. We recommend that you set both 
cooking zones at the same cooking level.