Alto-Shaam 610 Manual Do Utilizador

COMbITOUCh® ES SERIES • ELECTRIC  INSTALLATION MANUAL • 37 .

TOP LEVEL ASSY, VHES-5 HOOD

FOR COMBI

2

6

1

4

3

5

7

1

  Ventless Hood Power Knob

2

     Emergency Latch Release:  This release is to 

be used only if the timed latch mechanism is 

not working or in the event of a power outage.  

repeated use of the emergency release may 

damage the switching mechanism.

3

  Indicator Lights:  if the indicator lights do 

not illuminate, the filters may be missing or 

not properly aligned.  check them for proper 

positioning.  Ventless hood and oven will not 

operate unless the hood is closed properly.  

4

  Combi Reset Button:  The reset has to be used 

if the combitherm oven is turned on before the 

hood or if the hood was opened.  it resets the 

pressure switch circuit and provides power to 

the combi control circuit.  This switch must also 

be used to reset hood controls after any problem 

with the filters, or the improper latching of the 

ventless hood door. 

5

  Charcoal Filter:  The charcoal filter should be 

inspected for contaminant's on a regular basis.  

replacement must be made at a minimum of 

three month intervals — more often if heavy 

contaminant's are visible or if the filter no 

longer controls odors.

   To remove the filter, pull and slide out while 

holding the bottom housing.  when replacing 

the filter, make certain the air flow arrow(s) 

point toward the hood fan, and that the filter 

is replaced in the three-sided metal frame 

provided with the hood.

  Fi-24114 (Vhes-5); Fi-24102 (Vhes-10)
6

Timed Latching Mechanism:  in order to 

evacuate steam and grease-laden air from the 

oven interior, this mechanism prevents the 

operator from fully opening the oven door for 

25 seconds to one minute.  The mechanism 

automatically disengages at the end of a pre-set 

time allowing full door extension.

7

  Grease Filter:  cleaning frequency should be 

based on oven usage with a maximum of two 

weeks between cleaning if the oven is used for 

non-grease laden products or steam applications 

only.  grease laden products require cleaning 

frequency of at least once a week.

   remove the grease filter by pulling it straight 

out of the housing.  place the filter in the 

dishwasher or wash separately by placing in 

hot, soapy water until all grease and particles 

have been removed.  rinse thoroughly.  allow 

the filter to air dry before reinstalling.

   To replace the grease filter, the air flow arrow 

on the filter casing should be pointing toward 

the hood fan.

  Fi-24113 (Vhes-5); Fi-23062 (Vhes-10)

1

  Turn the ventless hood 

power knob “ON”.

2

     Wait five seconds, then 

press the “coMBi 
reseT” button.

3

   Turn the combitherm 

oven power “ON”.