Lightolier C6T6VN Folheto
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1204
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1204
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
HID Downlight
C6T6VN
Page 1 of 2
6" Aperture, 2pc Vertical, T6 Narrow Beam
Features
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides narrow
beam optics ideal for high ceilings. Also available in medium and wide beam,
see C4T4VM and C4T4VW specification sheets.
see C4T4VM and C4T4VW specification sheets.
2. Aperture Cone: Provides 50° visual cut-off to lamp and lamp image; self-
flange in painted white or aperture-matching polished flange. Consult factory
for other finishes.
for other finishes.
3. Lamp Shield: High-temperature glass as required by code, captive during
re-lamping. Light diffusion provides exceptionally smooth beam.
4. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.
Snaps onto upper reflector for secure attachment without tools; assures
proper lamp alignment to optics for consistent performance.
proper lamp alignment to optics for consistent performance.
5. Mounting Frame: 0.048" (18-ga.) galvanized steel. Vertical adjustment
mechanism accommodates mounting to virtually any ceiling system using
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking
feature secures all adjustments. Alignment holes and markings allow fixture
to be preset prior to installation.
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking
feature secures all adjustments. Alignment holes and markings allow fixture
to be preset prior to installation.
6. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
notches allow consistent alignment of multiple fixtures.
7. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to
30" long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
attachment to common T-bar systems. Self-centering feature simplifies
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
8. Trim Retention Springs: Rust resistant springs secure reflector/housing for
quick, tool-less installation.
9. Ballast / Socket Housing / Cover Assembly: Snaps onto junction box
without tools for inspection and ballast replacement, accessible from below.
10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating “A”,
-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating “A”,
-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
Electrical (cont.)
150W Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast
ANSI Code Voltage Max. Amps Input Watts
39W MH M130
120/277
0.39/0.17
44
70W MH M139
120/277
0.67/0.29
78
150W MH M142
120/277
1.40/0.60
169/166
*150W MH M142
120/277
3.70/1.60
180
*Magnetic Ballast
Options and Accessories
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet
”A/E“. For 277 electronic consult factory
Emergency: Add suffix E to Reflector Trim and Frame-In Kit. See Spec. Sheet
“A/E”.
Slope Ceiling Adapters: See Specification Sheet SCA.
Chicago Plenum: Consult Factory.
”A/E“. For 277 electronic consult factory
Emergency: Add suffix E to Reflector Trim and Frame-In Kit. See Spec. Sheet
“A/E”.
Slope Ceiling Adapters: See Specification Sheet SCA.
Chicago Plenum: Consult Factory.
Labels
cULus (Suitable for Damp Locations), I.B.E.W. For 150W, install fixtures with
minimum spacing; 3 feet from center-to center of adjacent luminaries, 3” from
top of luminaire to overhead building member; 1 1/2 feet from luminaire center to
side building member.
minimum spacing; 3 feet from center-to center of adjacent luminaries, 3” from
top of luminaire to overhead building member; 1 1/2 feet from luminaire center to
side building member.
Reflector Trim
Frame-In Kit
Lamp
C6T6VN CLW
Specular Clear, White Painted Flange.
CLP
Specular Clear, Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C639T6E1
Electronic 120V
39W T6
Ceramic Metal Halide
C639T6E2
Electronic 277V
39W T6
Ceramic Metal Halide
C670T6E1
Electronic 120V
70W T6
Ceramic Metal Halide
C670T6E2
Electronic 277V
70W T6
Ceramic Metal Halide
C615T6E1
Electronic 120V
150W T6
Ceramic Metal Halide
C615T6E2
Electronic 277V
150W T6
Ceramic Metal Halide
C615T6U
Magnetic 120V/277V
150W T6
Ceramic Metal Halide
Top View: Magnetic Ballast
Top View: Electronic Ballast
Ceiling Cutout: 6 9/16” (167 mm) Dia.