Honeywell DR4300 Manual Do Utilizador

 
 
 

TIME   [factory setting] 

EU-M 
 

EU-H 

RAMP UNITS—The selection you make here will 
determine whether the ramp segments will be configured 
in terms of time or in terms of rate. 

TIME—Ramps will be configured in hrs:min. 

Engineering Units per Minute—Ramps will be 
configured as a rate in EU-M. 

Engineering Units per Hour—Ramps will be configured 
as a rate in EU-H. 

DIS  [factory setting] 
HOLD 

END STATE—Specify whether the program will be 
disabled after execution, or be placed in Hold. 

0 to 99 hours:0 to 59 min 
(if RPUNIT = TIME) 

or 

0 to 999 degrees per minute 
or hour (if RPUNIT = EU-M 
or EU-H) 

  [factory setting=0.00] 

SEGMENT 1 RAMP VALUE—Enter the ramp time or 
ramp value for Segment 1. 

range depends on setpoint 
limits [factory setting=0] 

SEGMENT 2 SETPOINT—Enter the setpoint for Segment 
2. 

0 to 99 hours:0 to 59 min 
[factory setting=0] 

SEGMENT 2 TIME—Enter the duration for Segment 2 

0 to 99 hours:0 to 59 min 
(if RPUNIT = TIME) 

or 

0 to 999 degrees per minute 
or hour (if RPUNIT = EU-M 
or EU-H) 

[factory setting=0.00] 

SEGMENT 3 RAMP VALUE—Enter the ramp time or 
ramp value for Segment 3. 

range depends on setpoint 
limits [factory setting 0] 

SEGMENT 4 SETPOINT—Enter the setpoint for Segment 
4. 

0 to 99 hours:0 to 59 min 
[factory setting=0] 

SEGMENT 4 TIME—Enter the duration for Segment 4