Wagner SprayTech 9140S Manual Do Utilizador

Spray

gun

Spray

tip

Spray hose

Pail bracket

Lubricating

area (on front

face plate)

Hose

bracket

Handle

Motor

housing

Return

tube

Suction

tube

Suction set screen

ON/OFF switch

O = OFF

l = ON

PRIME/

SPRAY

knob

Fluid
section

O

l

PRIME/SPRAY knob

PRIME position

SPRAY position

Customer Service: 800-880-0993

4

© 2003 Wagner Spray Tech - All rights reserved.

English

The shipping carton for your painting system contains the following:
• Suction set and return tube

• Spray gun with filter 

• Spray tip assembly (see chart below)
• 25 foot long, 1/4 inch diameter pressure hose (9140, 9140S, 9150)
• 50 foot long, 1/4 inch diameter pressure hose (9170, 9190, 9210)
• Separating Oil

ON/OFF Switch ................The ON/OFF switch turns the unit on

and off (O=OFF, l=ON).

Suction Set .......................Fluid is drawn through the suction

set into the pump.

Fluid Section ....................A piston in the fluid section moves up

and down to create the suction that
draws fluid through the suction set. 

Spray Gun ........................The spray gun controls the delivery

of the fluid being pumped.  The gun
model you have depends on your

sprayer model (refer to Spray
Gun/Tip Chart, below).

Spray Hose ......................The spray hose connects the gun to

the pump.

Return Tube......................Fluid is sent back out through the

return tube to the original container.

PRIME/SPRAY Knob........The PRIME/SPRAY knob directs fluid

to the spray hose when set to SPRAY
or the return tube when set to PRIME.
The arrows on the PRIME/SPRAY
knob shows the rotation directions for
PRIME and SPRAY.  

The PRIME/SPRAY knob is also used
to relieve pressure built up in the
spray hose (Pressure Relief
Procedure, page 6)

Pressure Control Dial .......The pressure control dial controls

the amount of force the pump uses
to push the fluid (see graphic below
for locations).

Pressure Control Dial

Rear of motor shroud,

(9140, 9140S, 9150,

9170, and 9190).

Front face plate,

9210 model

Spray hose

port

9150
9170
9190

GX-07
GX-07
GX-08

.013
.015
.017

.015
.017
.019

Yellow (fine)

9140/S

GX-06

.013

.015

Yellow (fine)

Yellow (fine)

White (medium)

9210

GX-10

.017

.021

White (medium)

Spray Gun/Tip Chart