Emerson Process Management 3-9000-522 Manual Do Utilizador
APPLICATION FUNCTIONS
5-71
MON2000
JULY 2010
Serial Ports Configuration
Click the
button to accept your
changes and return to the main window.
Click the
button to abort and
return to the main window.
5.17.1 Serial Ports Configuration
Each GC Controller port number is listed in the
Port column of the Serial Ports dialog. The
number of available ports is hardware-specific.
Com ID
Modbus slave address.
To use the address defined by the GC Controller DIP switches, set to 0.
Read/Write
Read/write setting
Range: R (Read only), W (Write only), RW (Read and write).
This parameter only functions with slave ports.
Mode
Only applies to 2350A CPU board (P/N 2-3-2350-190) or Model 700 CPU board
(P/N 2-3-0700-036).
(P/N 2-3-0700-036).
Sets the communication protocol directly, instead of through jumper settings.
Range: RS232, RS422, RS485.
Table 5-13 Description of Serial Port Settings (Continued)
Setting
Description