Emerson Process Management 3-9000-522 Manual Do Utilizador
UPGRADE 2350A GC S/W AND 2350 EPROMS
E-17
MON2000
JULY 2010
GC Reassembly
4. After the C:\> prompt is displayed, type
ERASE *.*
, then press
ENTER
. When
prompted “ARE YOU SURE?” Type Y, then
press
ENTER
.
5. At the C:\> prompt, type DIR, then press
ENTER
. Verify that only the Command.com
file remains on the ‘C:’ drive, that the file
size is 54,645 bytes, and that there are
16,105,472 bytes free.
6. Type A:, then
ENTER
to change back to the
A:\ drive. Type INSTALL, then follow Steps
E.8.3 GC Reassembly
Use the following instructions to reassemble
the GC Controller (CPU, PC/104 Bus and the
Modem).
Figure E-1 CPU, PC/104 and Modem
1. Place and securely plug the WinSystems
CPU Board into slot number 2 of the Card
Cage Assembly.
2. Reconnect all ribbon cables that were
unplugged.