Multi-Tech Systems MVP2400 Manual Do Utilizador

4. The  MVP____- Firmware  screen appears saying “MultiVOIP [model

number] is up.  Reboot to Download Firmware?”

Click OK to download the factory defaults.
The “Boot” LED on the MultiVOIP will light up and remain lit during
the file transfer process.

5. After the PC gets a response from the MultiVOIP, the Dialog – IP

 screen will appear.

The user should verify that the correct IP parameter values are listed
on the screen and revise them if necessary. Then click OK.

6. Progress bars will appear at the bottom of the screen during the data

transfer.

The MultiVOIP’s “Boot” LED will turn off at the end of the  transfer.

7. The  Download Factory Defaults procedure is complete.