Avaya P332G-ML Manual Do Utilizador

Chapter 12

Avaya P330 Layer 3 Features

88

Avaya P332G-ML User’s Guide

If the IP interface is on VLAN #1, continue with step 7.

6

Create the management/routing VLAN. Use the command 
set vlan 

<Vlan-id> name <Vlan-name> 

replacing <Vlan-id> by the 

VLAN number, and <Vlan-name> by the VLAN name. Press Enter.

7

Create an IP interface name. Type:
Router(configure)# interface <interface-name> 
Press Enter. 
The Router(configure-if:<interface-name>)# prompt appears.

8

Assign the IP address and network mask of the IP interface you have created. 
Use the command:
Router(configure-if:<interface-name>)# ip address 

<ip-

address> <netmask>
Press Enter

9

Assign a vlan to the IP interface you have created. Type: Assign a vlan to the IP 
interface you have created. Type:  
Router(configure)# interface <interface-name># ip vlan 

<vland-id> 
Press Enter. 

10 Type exit and press Enter. This returns you to the prompt: 

11 If the management station is not on the same subnet as the switch, configure a 

default gateway (static route). Use the command:
ip default-gateway 

<ip-address> 

and press Enter, replacing 

<ip-address> 

with the IP address of the default gateway.

12 Save the configuration changes by typing copy running-config 

and press Enter.

In order to benefit from Layer 3 Routing functionality, it is required that you either 
purchase a Layer 3 preconfigured P330-ML module or a Routing License Key 
Certificate for the P330-ML.
Each Certificate is specific for:
•

The  module  type.

•

The required feature.

•

The number of devices.

After you purchase a Routing Licence Key Certificate, you must obtain and activate 
a Routing License Key.