Avaya P332G-ML Manual Do Utilizador
Chapter 10
Basic Switch Configuration
Avaya P332G-ML User’s Guide
51
Network Time Acquiring Protocols Parameter Configuration
The P330 can acquire the time form a Network Time Server. P330 supports the
SNTP Protocol (RFC 958) over UDP port 123 or TIME protocol over UDP port 37.
Use the CLI commands briefly described below for configuring and display time
information and acquiring parameters.
SNTP Protocol (RFC 958) over UDP port 123 or TIME protocol over UDP port 37.
Use the CLI commands briefly described below for configuring and display time
information and acquiring parameters.
In order to...
Use the following command...
Restore the time zone to its default,
UTC.
UTC.
clear timezone
Configure the time zone for the
system
system
set timezone
Configure the time protocol for use
in the system
in the system
set time protocol
Enable or disable the time client
set time client
Configure the network time server
IP address
IP address
set time server
Display the current time
show time
Display the time status and
parameters
parameters
show time parameters
Display the current time zone offset
show timezone
Get the time from the time server
get time