Lucent Technologies Release 8.2 Manual Do Utilizador
Configuration 2: R7r (+CMS) <—ethernet—> R7csi
87
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Switch 2 Task— Assign Link via ethernet Data Module to the LAN
This task administers an ethernet data module on Switch 2 for the ethernet connection
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
to Switch 1. The data module associates a link number with a port address, extension
number, and node name for the C-LAN port used for this connection.
Begin
Steps
>
Open Data Module form — enter
ad da n
[This data module is assigned the next available extension, 3020.]
> Enter values
> Submit the screen
End
add data next
Page 1 of X
Page 1 of X
DATA MODULE
Data Extension: 3201
Name: ethernet on link 5
Type: ethernet
Port: 01a0517_
Link: 5
Link: 5
Network uses 1’s for broadcast addresses? y
Field
Conditions/Comments
Type:
This indicates the data-module type for this link.
Port:
Ethernet connections must be assigned to port 17 on the C-LAN
circuit pack. In this example, the C-LAN circuit pack is in slot
1a05.
circuit pack. In this example, the C-LAN circuit pack is in slot
1a05.
Link:
The link number must be in the range 1 – 25 (R8csi), not
previously assigned on this switch.
previously assigned on this switch.
Name:
Information-only; appears in list generated by the “list data
module” command.
module” command.
Network uses
1’s for
broadcast
addresses?
1’s for
broadcast
addresses?
Leave the default (
y
) if the private network contains only
DEFINITY switches and adjuncts. Set to
n
only if the network
includes non-DEFINITY switches that use the 0’s method of
forming broadcast addresses. See Appendix A, “Data Module -
type ethernet” for more information about this field.
forming broadcast addresses. See Appendix A, “Data Module -
type ethernet” for more information about this field.