Lucent Technologies Release 8.2 Manual Do Utilizador
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)
<—ethernet—> R8si
<—ethernet—> R8si
3
C-LAN Administration
Administration for Network Connectivity
CID: 77730
555-233-504 — Issue 1 — April 2000
174
Switch 1 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.
Note:
Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter
node names for switches, routers, and CMS starting on page 2.
node names for switches, routers, and CMS starting on page 2.
Begin
Steps
> Open Node Names form — enter
ch node-n
> Go to page 2
> Enter values.
> Submit the screen1
End
change node-names
Page 2 of 6
NODE NAMES
Name IP Address
Name IP Address
Name IP Address
default_________
0__.0__.0__.0__ _______________
___.___.___.___
node-1a-ppp
192.168.10_.11_
_______________ ___.___.___.___
node-1a
______ 192.168.10_.13_
_______________ ___.___.___.___
node-1b
______ 192.168.10_.130
_______________ ___.___.___.___
node-1b-eth
__ 192.168.10_.128
_______________ ___.___.___.___
node-2____
192.168.10_.12_
_______________ ___.___.___.___
node-3____
192.168.10_.129
_______________ ___.___.___.___
Field
Conditions/Comments
Name
Enter unique node names for the following 6 nodes:
•
C-LAN(a) PPP port on Switch 1 for the connection to Switch 2
•
C-LAN(a) PPP port on Switch 1 for the connection to C-LAN(b)
•
C-LAN(b) PPP port on Switch 1 for the connection to C-LAN(a)
•
C-LAN(b) Ethernet port on Switch 1
•
C-LAN PPP port on Switch 2.
•
C-LAN Ethernet port on Switch 3
IP Address
The unique IP addresses of the nodes named in the previous field.