Lucent Technologies Release 8.2 Manual Do Utilizador
Overview
59
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000
CID: 77730
3
C-LAN Administration
Intuity AUDIX LAN Setup Summary
The following list summarizes the steps for setting up an Intuity AUDIX on a LAN.
1
Assign node name and IP address
2
Assign UNIX machine name, IP address, configure LAN card.
“Networking Administration, TCP/IP Administration”
3
Assign country and switch type
“Switch Interface Administration, Switch Selection”
4
Assign extension length, Host Switch Number (switch node from dial plan),
Audix Number, Switch Number IP address of the switch, and TCP Port.
Audix Number, Switch Number IP address of the switch, and TCP Port.
“Switch Interface Administration, Call Data Interface Administration, Switch
Link Administration.”
Link Administration.”
5
Reboot the Intuity AUDIX
“Customer/Services Administration, System management, System Control,
Shutdown System.”
Shutdown System.”
6
Set up the DCS Network Time Zones
7
“Audix Administration, change switch-time-zone.”
CMS LAN Setup Summary
The following list summarizes the steps for setting up a CMS server.
1
Edit the /etc/hosts file to add switch names and IP addresses
2
Set up a second NIC
3
Add a default router
4
Set up the local/remote port
5
Choose between x.25 and TCP/IP signaling
6
For X.25, define which physical port is used on CMS
7
For TCP/IP, assign the switch host name or IP address and TCP port number