Bay Technical Associates DS Series Manual Do Utilizador
DS62-Network, DS62-MD4 Network/Modem Host Module
10
Attention Character
If no Baytech power strips are to be controlled through this Data Server, skip this step. Pressing the
Attention Character 5 consecutive times will access the network main menu. The Default is a semi-
colon (;). Select this option to change the attention character. The DS displays the following:
Attention Character 5 consecutive times will access the network main menu. The Default is a semi-
colon (;). Select this option to change the attention character. The DS displays the following:
Attention Character is........... ;
Enter Attention Character :
Login Setup Menu
Figure 3
Access Control
This security feature allows the admin to enable or disable usernames and passwords for both network
and serial port access.
If either login has been enabled you will get a prompt similar to the following:
This security feature allows the admin to enable or disable usernames and passwords for both network
and serial port access.
If either login has been enabled you will get a prompt similar to the following:
Coldfire login: root
Password:
Password:
The default user and password is “root/baytech”, all lower case.
Manage Users
This menu allows the administrator to add/delete users and change their passwords for multiple users.
Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and
alphanumeric. The root user can not be removed. Select Manage User and the DS displays the
following:
Figure 4
Manage Users
This menu allows the administrator to add/delete users and change their passwords for multiple users.
Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and
alphanumeric. The root user can not be removed. Select Manage User and the DS displays the
following:
Figure 4
Access Control..................1 Telnet/Serial Enable/Disable Login prompt
Manage Users....................2 Change user password or port access,
Manage Users....................2 Change user password or port access,
add/delete
user,
Direct Port Connection..........3 Enable/Disable
Radius Configuration............4 See below for Radius menu
TACACS Configuration............5 See below for TACACS menu
Exit.........................X,CR
Enter Request :
Radius Configuration............4 See below for Radius menu
TACACS Configuration............5 See below for TACACS menu
Exit.........................X,CR
Enter Request :
User Management Menu
To change user password or port access, enter number of user.
To add/delete user, select appropriate menu choice.
SNMP V3 requires passwords that are between 8 and 31 characters long
Enter request, CR to exit menus.
A)...Add user
1)...root
Enter Request :
To change user password or port access, enter number of user.
To add/delete user, select appropriate menu choice.
SNMP V3 requires passwords that are between 8 and 31 characters long
Enter request, CR to exit menus.
A)...Add user
1)...root
Enter Request :