Avocent 590-686-501D Manual Do Utilizador
96
DSR Switch Installer/User Guide
Appendix C: Using Serial IQ Modules
The serial IQ module is a serial-to-VGA converter that allows VT100-capable devices to be viewed
from the DSR switch local port, the on-board web interface, or by using the DSView 3 software.
The actual serial data is not accessed, but is merely displayed. All serial data coming from the
target device is displayed in a VT100 window, placed into a video buffer and sent to the DSR
switch as though it came from a VGA target. Likewise, keystrokes entered on a keyboard are sent
to the attached device as though they were typed on a VT100 terminal.
from the DSR switch local port, the on-board web interface, or by using the DSView 3 software.
The actual serial data is not accessed, but is merely displayed. All serial data coming from the
target device is displayed in a VT100 window, placed into a video buffer and sent to the DSR
switch as though it came from a VGA target. Likewise, keystrokes entered on a keyboard are sent
to the attached device as though they were typed on a VT100 terminal.
Serial IQ module modes
The following modes can be accessed from the serial IQ module:
•
On-Line: This mode enables you to send and receive serial data.
•
Configuration: This mode enables you to specify DSR switch communication parameters, the
appearance of the Terminal Applications menu and key combinations for specific actions
and macros.
appearance of the Terminal Applications menu and key combinations for specific actions
and macros.
•
History: This mode enables you to review serial data.
Configuring the serial IQ module
NOTE:
The serial IQ module is a DCE device and only supports VT100 terminal emulation.
Pressing
Ctrl-F8
will activate the Configuration screen of the IQ module’s Terminal Applications
menu, which enables you to configure your serial IQ module.
NOTE:
When any Terminal Applications menu is active, pressing
Enter
saves changes and returns you to the
previous screen. Pressing
Escape
returns you to the previous screen without saving changes.
Within the Terminal Applications menu’s Configuration screen, you can modify the
following options:
following options:
•
Baud Rate: This option allows you to specify the serial port communications speed. Available
options are 300, 1200, 2400, 9600, 19,200, 34,800, 57,600 or 115,200 bps. The default value
is 9600.
options are 300, 1200, 2400, 9600, 19,200, 34,800, 57,600 or 115,200 bps. The default value
is 9600.
•
Parity: This option allows you to specify the serial port’s communications parity. Available
options are EVEN, ODD or NONE. The default value is NONE.
options are EVEN, ODD or NONE. The default value is NONE.
•
Flow Control: This option allows you to specify the type of serial flow control. Available
options are NONE, XOn/XOff (software) and RTS/CTS (hardware). The default value is
NONE. If you select a bps rate of 115,200, the only available flow control is RTS/CTS
(hardware).
options are NONE, XOn/XOff (software) and RTS/CTS (hardware). The default value is
NONE. If you select a bps rate of 115,200, the only available flow control is RTS/CTS
(hardware).
•
DSR/CD Mode: This option allows you to control how the DSR switch and CD lines operate.
Available options are Always on and Toggle. When in Toggle mode, DSR and CD lines are
turned off for one-half second and then turned on each time a module is selected or deselected.
The default value is Always on.
Available options are Always on and Toggle. When in Toggle mode, DSR and CD lines are
turned off for one-half second and then turned on each time a module is selected or deselected.
The default value is Always on.