Avaya M-ACCF/SF Manual Do Utilizador

Chapter 4

X-Switch CLI & ATM Terminal Interface

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

53

The “Reset the Module” option does not reset the entire hub; it resets the 

selected module only.

You can download software to the X-Switch entity (CPU) of the M-ACC module  
using the TFTP/IP protocol. To enable the process, make sure there’s a reachable 
TFTP server in the network.
To download a software update to the M32-100T, use the Software Download 
option (option 2 from the Setup Main Menu). A screen similar to the following 
displays:

Software Download parameters (Using TFTP/IP).

M-ACCF   S/W Version: 4.0.7   Slot #: 5

<CR> Refresh the screen

 0.  Return to Previous Menu

 1.  Save the Session

 2.  List

----------------------------

 3.  TFTP Server and File parameters...

 4.  Start Software Download process

 5.  Monitor software download process...

 >>>Enter your choice:

Entering Software Download Parameters

Select option 3 to enter the TFTP server, file and version parameters.  The following 
prompts are displayed, with the current parameters displayed in every line:

     TFTP Server IP address: 149.49.39.12

     File Name: /home3/users/gk/vx/960cf/M-ACCF

     Downloaded file will override the old version (4.0.7)

-----------------------------------------------------------

>>>Enter Server IP address [nnn.nnn.nnn.nnn]:135.49.60.115

>>>Enter File Name: c:\mng\agents\Macc

>>>Override version: 1 - (Version 4.0.7), [2 - (Version 4.0.7)]: 1

1

Enter the TFTP Server IP address.

2

Enter the filename (Macc) of the new software version (full path).

3

Enter the version you wish to overwrite.
The M-ACC stores two software versions.  It is recommended that you 
overwrite the oldest version.  See the version number to find out which is the