Avaya M-ACCF/SF Manual Do Utilizador
Chapter 4
X-Switch CLI & ATM Terminal Interface
56
Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide
Clear Mac Address Table
Option 6 from the Main Menu 'Clear Mac Address Table', allows you to clear the
MAC address table of the entire Avaya M770 domain from a single point. This is
performed as follows (from the Main Menu):
MAC address table of the entire Avaya M770 domain from a single point. This is
performed as follows (from the Main Menu):
>>>Enter your choice: 6
Proceed with clearing the MAC address table ? [Y/N] y
...MAC address table was cleared.
Reset is required to make the change effective. Reset now ? [Y/N] y
Resetting. Please Wait ...
<CR> Refresh the screen
Note:
The above command takes effect only after you perform a reset (wait at least
half a minute before resetting).
After system reset, the MAC address table on all modules in the DomainX is
cleared.
cleared.
Configuration Copy
Option 7 from the Main Menu 'Configuration Copy', allows you to copy the
configuration of another M-ACC module to the current module.
configuration of another M-ACC module to the current module.
Which module configuration do you wish to copy from ?
Enter slot number (range 1 to 7) or 'q' to quit :
ATM IP Configuration
Option 8 from the Main Menu 'ATM IP Configuration', allows you to show and set
the IP Configuration of the ATM entity of the M-ACC.
the IP Configuration of the ATM entity of the M-ACC.
ATM IP Configuration Menu
-------------------------
0. Return to Previous Menu
1. Set IP Configuration
2. Show IP Configuration
Please enter your choose:2
IP Address Netmask Default Gateway
--------------- --------------- ---------------
149.49.54.249 255.255.255.0 149.49.54.1