Avaya M-ACCF/SF Manual Do Utilizador

Chapter 4

X-Switch CLI & ATM Terminal Interface

66

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

Ensure that the ATM access module and the ATM Switch to which it is 

connected are set up to use the same signalling and SONET/SDH standards. The 
two devices should also use the same ILMI VCC, signaling VCC, and UNI version. 
If the devices do not use the same standards, they cannot communicate with each 
other.

Port Submenu [2,1]

The Port submenu enables port attributes display, statistics, and settings. See Figure 
4.11.

Table 4.4 below explains the operational meaning of each of the submenu items 
above.

Port Submenu 
Item

Operational Meaning

[1] display

Shows the current ATM port attributes. See Figure 4.12.

[2] statistics

Displays ATM port cell traffic statistics. See Monitoring 
the ATM Access Module76

[3] uni

Allows you to set the system to network interface 
version 3.0 or 3.1

[4] address

Displays the local ATM addresses

[5] sigTimeRes

Changes the Signalling time resolution

[6] physical

See ATM Port Physical Submenu below.

ATM Port Menu

 =============

 [1] display

- Display port attributes

 [2] statistics

- Display port statistics

 [3] uni

- Change UNI version 3.0/3.1

 [4] address

- Display local ATM addresses

 [5] sigTimeRes

- Change Signalling Time Resolution

 [6] physical

- Administer ATM port physical parameters ->