GarrettCom MNS-6K-SECURE 14.1.4 Manual Do Utilizador

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E

VLAN Port Status.

Port 14
    Default ID              :     1
    Filter Status        : ENABLED.
    VLAN Memberships:
       Vlan:     1 Status: Active UNTAGGED
       Vlan:    10 Status: Active TAGGED
       Vlan:    20 Status: Active TAGGED
       Vlan:    30 Status: Active TAGGED

In the above example, "show-port" command provides a perspective on which VLANs are associated
with which ports, whether the VLANs are active, tagged or untagged. While the above instructions are
illustrative of how the commands are used, it is recommended to download the tech briefs on how to
configure VLAN on MNS-6K using Cisco Catalyst® switches or Magnum DX routers. These tech
briefs are available on the GarrettCom Inc. web site

www.garrettcom.com

– under Resources and

Support Software Support. On that page, look for the drop down on “Technical Briefs”

List of commands in this chapter

Syntax set vlan type=<tag|none> defines the VLAN type

Syntax vlan <enable|disable> - allow VLAN commands or configure vlan commands

Syntax vlan – enter the subset of VLAN commands

Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>

[forbid=<number|list|range>] [<mgt|nomgt>] - adding VLAN

Syntax start vlan=<name|number|list|range> activate the VLAN configuration

Syntax save save the configuration (including the VLAN configuration)

Syntax edit id=<vlan id> [name=<vlan name>] port=<number|list|range>

[<mgt|nomgt>] - edit existing VLAN name

Syntax show vlan [<id=vlanid>] display specific VLAN information

Syntax set-port port=<number|list|range> default id=<number> sets the default VLAN id.

For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this command

Syntax set-port port=<number|list|range> filter status=<enable|disable> enables or disables

the VLAN filtering function.

145