GarrettCom MNS-6K-SECURE 14.1.4 Manual Do Utilizador
M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Magnum6K25#
show console
Console/Serial Link
Inbound Telnet Enabled
: Yes
Outbound Telnet Enabled
: Yes
Web Console Enabled
: Yes
SNMP Enabled
: Yes
Terminal Type
: VT100
Screen Refresh Interval (sec) : 3
Baud Rate
: 38400
Flow Control
: None
Session Inactivity Time (min)
: 10
Magnum6K25#
F
IGURE
25
-
Reviewing the console parameters – note telnet is enabled
Users can telnet to a remote host from the Magnum 6K family of switches.
Syntax telnet <ipaddress> [port=<port number>]
The default port for telnet is 23.
Magnum6K25#
show ipconfig
IP Address : 192.168.1.11
Subnet Mask : 255.255.255.0
Gateway Address : 192.168.1.1
Magnum6K25#
telnet 192.168.1.1 port=2097
F
IGURE
26
-
Example of a telnet session
While MNS-6K times out an idle telnet session, it may be useful to see who is currently connected to
the switch. It may also be useful for a person to remotely terminate a telnet session. To facilitate this,
MNS-6K supports two commands
the switch. It may also be useful for a person to remotely terminate a telnet session. To facilitate this,
MNS-6K supports two commands
Syntax show session
Syntax kill session id=<session> - terminate a telnet session
43