Netcomm NCT240 Manual Do Utilizador

 

GREEN – SOLID 

Power on 

GREEN – SOLID   

System finished initializing 
stage  

Flashing GREEN – 2Hz 

System is booting up   

Flashing GREEN – 4Hz 

System is ready to restart – 
release the ACO/RST button 
to restart   

SYS (system) - When the 
ACO/RST button is pressed 

Flashing GREEN – 1Hz 

System is ready to reset to 
Factory default – release the 
ACO/RST button to reset to 
factory default 

RED 

Major alarm reporting 

AMBER 

Minor alarm reporting 

GREEN 

ADSL link is UP 

Flashing GREEN 

DSL line is training (to linkup) 

AMBER 

Ethernet Fiber port is UP 

Flashing AMBER 

Dataflow activity in the port 

GREEN 

Ethernet Copper port is UP 

Flashing GREEN 

Dataflow activity in the port 

 
 

 

1.  19” wide rack mount available. 
2.  1U height 

3.  Provide 24 DSL ports and built-in splitters. 

 

1.  The connector is SFP type at optical interface port. 
2.  The connector is RJ-45 at copper interface port. 

3.  When plug in SFP, the work interface will select optical interface automatic and 

copper interface is assistant interface. And when plug out SFP, the copper interface 

will change to work interface automatic. 

4. 

Supported SFP optical module types have 1000 Base-SX, 1000 Base-LX, 1000 

Base-LHX and 1000 Base-ZX. 

 

 

1.  Support 24 ports ADSL2+ line interface module (ATU-C). 
2.  Build in Splitter/Filter internal. 

3.  The connectors are wire-wrapping; a converter device can be connected in 

between interfaces and user device at both ADSL2+ line interface and PSTN 

interface.